My Shelby Daytonas

Current Vehicle Modifications

1. K&N Cone Filter

2. MP performance Computer

3. Deleted cat

4. Kelly Charger 225 50 r15 tires on refinished crab rims

5. 3" mandrel exhaust with Dynomax race muffler #17223

6. 1st gen Talon BOV on custom pipe

7. Boost and A/F Gauge in pilar pod

Future Modifications

1. Cold air kit(done)

2. A/F Gauge (done)

3. Granger valve for quicker spool up

4. Turn boost up a little (When I can afford to break things!)

5. Pillar mounted boost and A/F gauge (done)

6. Talon BOV (done)

7. New Paint

Repairs performed to date

1. New Alternator (Three times now)

2. Replaced Alternator Bushings

3. Timing Belt Replaced and timing set to 12

4. Cap, Rotor, and Plugs

5. Plug Wires

6. Changed trans fluid to mobil 1 5w30 (Big difference!)

7. Mustang 5.0 Filter with every oil change

8. 89 Daytona Visors(with mirrors) and Headliner

9. Rear Wheel Bearings Greased

10. Scheduled Chasis Greasing

11. AC Switched to R134a With New Pump bearings and Belt

12. New alternator and Water Pump Belt

13.flushed coolant system

14. HEP Again(twice in two years used a mopar one this time)

15. Replaced the rubber section of the turbo coolant return line

16. Replaced passenger seat hinge after accident

17. Passenger side axle replaved

18. Driver and passenger ball joint dust boots replaced

19. A/C compressor replaced

20. A/C compressor replaced again painted and system charge w/134a

Front-Drive mopars and Shelby-Dodges [ Join Now | Ring Hub | Random | << Prev | Next >> ]

g-Force Daytona Web Ring [ Join Now | Ring Hub | Random | << Prev | Next >> ]